SS-33 Utility Hangers

KEY FEATURES

Split Set utility hangers are available in 46 and 61-cm tube lengths to support light loads such as cables, vent tubing and pipes.
Utility hangers can be driven inside installed Split Set stabilizers, by aligning the hanger slot with that of the stabilizer. This permits easier installation of mesh, after the ground is secured by the stabilizers.
They are used to support cables, ductwork, pipes, trolley wires, – what have you. Lightweight items such as ventilation tubing may be hung from the loop on the bearing plate.
They’re not for ground support, but they offer the same installation advantages as Split Set stabilisers.
They come in the same tube diameters, and use the same bearing plates.
Split Set utility hangers can make screen and mesh installation much easier, faster and safer. After your opening is secured with standard Split Set stabilisers, install the mesh all at once by driving Split Set utility hangers inside the stabiliser tubes. No new holes are needed. There’s no awkward handling of mesh at the end of a long bolt, or under unsupported ground. Screen conforms to the rock more tightly. No other bolt has these advantages!